Site Preparation Guide Site Preparation Tasks
Page 5
Environmental Requirements
• Printer shipping temperature shall be in the range of -40°C to 70°C (-40°F to 158°F). In
freezing temperatures, bring the printer indoors and leave crated until the it reaches room
temperature.
• Air quality conditions with excessive solid particulates (conductive or non-conductive) may
result in system damage.
• Air quality conditions in which airborne oils are allowed to accumulate on or within the
printer can damage the plastic components.
• System operating temperature shall be in the range of 15°C to 30°C (60°F to 86°F), with
relative humidity range of 20% to 80% non-condensing.
• System storage temperature shall be in the range of 0°C to 35°C (32°F to 95°F), with
relative humidity range of 20% to 90% non-condensing.
• Altitude shall not exceed 3000 m (9843 ft).
• Material storage shall be in the range of 13°C to 30°C (55°F to 86°F), with relative humidity
less than 70%.
• Noise emission (acoustic): <65dBA when idle and when building
Heat Output
TBD
Power Consumption
TBD
To Next Page
Loading...
