Need help?Do you have a question about the Stratasys FDM 2000 and is the answer not in the manual?
Provides information to operate and maintain Stratasys FDM 2000/3000/8000.
Details the three main sections: Introduction, Procedures, and Reference.
Explains symbols and text formatting conventions used in the manual.
Describes the four main parts of the Stratasys modeling system and the FDM process.
Lists and describes materials like ICW06, P400 ABS, P500 ABSi, and E2O.
Provides guidelines for storing Stratasys modeling materials to maintain quality.
Explains the BASS system using a second nozzle for support material.
Details the WaterWorks system using a second nozzle and ultrasonic cleaner for support.
Discusses making support material part of a designated group for optimal system use.
Explains how to finish parts after using BASS or WaterWorks soluble release.
Details various operations for using the FDM system, like changing heads and setting temperatures.
Lists the model sizes, wall thicknesses, slice resolutions, and materials the FDM can use.
Outlines user, space, and environmental requirements for operating the FDM system.
States that installation is available for the FDM 2000/3000/8000.
Details calibration procedures for toolpath width and tip offsets for accurate part building.
Provides step-by-step instructions for modeling operations like changing the FDM head and setting temperatures.
Lists the tools and equipment necessary for maintaining the Stratasys FDM 2000/3000/8000.
Provides instructions on how to clean the FDM head, including drive wheels and liquefiers.
Outlines routine daily cleaning tasks for the FDM system components.
Details monthly maintenance checks, focusing on the filament sensor operation.
Lists common symptoms, their causes, and solutions for troubleshooting FDM issues.
Explains the torque limiting function and common causes for exceeding the torque limit.
Explains the fundamental process of FDM, how material filament is liquefied and deposited.
Describes the functions of the temperature controls and adjustment buttons on the FDM control panel.
Explains the keypad layout, display panel options, and common FDM messages.
Details the Baud and Parity Settings and the RS-232 Serial Interface pinout.
General| Brand | Stratasys |
|---|---|
| Model | FDM 2000 |
| Category | 3D Printers |
| Language | English |
To Next Page