Stratasys FDM 2000 - FDM 2000;3000;8000 Troubleshooting; Symptoms and Solutions

Procedures
®
F2/3/8000-41
10MAY01
FDM 2000/3000/8000
Troubleshooting
FDM head runs opposite Parameters not downloaded Reload parameters
the direction it is supposed
to after 201 is changed
X-Y driver cables are Swap X-Y driver
interchanged cables
Z stage runs opposite the Parameters not downloaded Reload FDM
direction it is supposed to properly parameters
Z stage will not rise Fuse is blown Replace the fuse
Call Stratasys hardware
technical support
Cables are not properly Connect the cables
connected
Cables are damaged Call Stratasys
hardware technical
support
Symptom Cause Solution
Troubleshooting