71
Table 4-8: Material Load Control Buttons - Load Button States
Table 4-9: Material Load Control Buttons - Unload Button States
Table 4-10: Material Load Control Buttons - Cancel Button States
Button State Description
The Load button is only selectable once a material spool’s
filament has contacted the filament present switch in the
material drive but is not yet loaded to the head, given that
another spool’s material is not already loaded to the head.
Pressing the Load button in this state will instruct the printer
to load material to the corresponding head.
Load button is disabled and not selectable.
Button State Description
The Unload button is only selectable once a material spool’s
filament is loaded to the corresponding head.
Pressing the Unload button in this state will instruct the
printer to unload material from the corresponding head.
Unload button is disabled and not selectable.
Button State Description
The Cancel button is only selectable after the Load or
Unload button have been pressed.
Pressing the Cancel button will cancel the material load/
unload in process.
To Next Page
Loading...
