Stratasys Objet1000 Plus - Environmental Conditions; Temperature and Humidity; Air Quality; Noise Level

EnvironmentalConditions
TemperatureandHumidity
Thetemperatureandrelativehumidityaroundtheprintermustbemaintainedwithincertainlimits.
Peakconditionsoccurwhentheprinterdrawsmaximumelectricalpower,resultingintheheat
dissipationlistedinthetablebelow.
Table5Heatdissipation(peakconditions)

HeatDissipation
Printer 6278BTU/hr
Theroomtemperatureandrelativehumidityshouldnotexceedthelimitslistedinthetablebelow.

Range
Temperature 18°Cto25°C(64.5°Fto77°F)
Relativehumidity 30%–70%non-condensing
Table6Roomtemperatureandrelativehumidityspecifications
AirQuality
Tomaintaintheairqualityaroundtheprinter,aconnectiontoanexternalventilationductisrequired.
NoiseLevel
Thenoiselevelaroundtheprinteristypicallylessthan85dBduringprinting.
Objet1000 Plus Environmental Conditions
17