Stratasys Objet1000 Plus - Accessories and Utilities; Start-Up Kit; Exhaust Adapter

AccessoriesandUtilities
Start-UpKit
Theprinterissuppliedwithastart-upkit,whichincludestoolsandaccessories.Thesetoolsand
accessoriesshouldbeavailableduringprinterinstallationandoperation.
ExhaustAdapter
Anexhaustadapterissuppliedwiththeprinter.Whenattachedtothebackoftheprinterand
connectedtoanexternalventilationfanwithaduct,airexpelledfromtheprinterisdischargeddirectly
outdoors,asshowninthefigurebelow.
 RequiredSuctionattheExhaustAdapter
DuctDiameter Minimum Maximum
4in(100mm) 212cfm(6m
3
/min) 269cfm(7.6m
3
/min)
Figure8Printerexhaustsystem
Objet1000 Plus Accessories and Utilities
18