Stratasys Objet1000 Plus - Introduction

Introduction
Theinformationandrequirementsprovidedinthisdocumentensureproperinstallationandoperationof
theObjet1000Plus3Dprintingsystem.Thecustomerisresponsibleforpreparingthesiteas
describedinthisdocument,andaccordingtoanyapplicablelocalregulations.
Ifyouhaveanyquestionsabouttheinformationinthisdocument,contactyourStratasys
representative.
Allsiterequirementsmustbemetbeforetheinstallationdate.TheSitePreparationChecklistshould
besubmittedtoyourStratasysrepresentative.Shippingwillbearrangedafterthechecklistisreceived
byStratasys.
Non-compliancewithrequirementsspecifiedinthisdocumentmayresultinadditionalinstallation
charges.
Objet1000 Plus Introduction
5