Stratasys Objet1000 Plus - Waste Disposal

CompressedAir
Compressedairisusefulforroutinecleaningandmaintenanceactivities.Ifacompressedairlineis
availableatthesite,itisrecommended(butnotrequired)thatanoutletbeinstalledneartheprinter.
Note:
Ifthecompressedairlinedoesnotincludeanair-dryerunit,awater/oiltrapmustbe
installedontheairgunusedforcleaningtheprinter.Therecommendedairpressure
is5-7bar(70-90PSI).
FireSafetyEquipment
Agas-basedfireextinguisherisrecommendedincaseoffireinornearthesystem.Someotherfire
extinguishersarealsoacceptable,butliquidfireextinguishersshouldnotbeused.(Contactlocalfire
authoritiesforspecificrecommendations.)
Objet1000 Plus Accessories and Utilities
20