Stratasys Objet1000 Plus - First Aid for Working with Printing Materials

EyewashStation
Itisrecommendedtoinstallaneyewashstationneartheprinter,foremergencyuse.
BuildTrayUnloadingCart
Acartisprovidedformovingthebuildtraybetweentheprinterandthecleaningunit.
Figure9Build-traycart
Thetablebelowliststhespecificationsofthebuild-traycart.
Table7Cartspecifications
Loadcapacity 300Kg(662lbs.)
Lowerlimit 545mm(21.5in.)
Upperlimit 1110mm(43.7in.)
Note:
ThiscartisdesignedforusewiththeKrummRKK1600cleaningunit.Ifanyother
cleaningunitisused,contactyourStratasysrepresentative.
Objet1000 Plus Accessories and Utilities
19