Stratasys Objet1000 Plus - Page 2

Copyright
Copyright©2018StratasysLtd.Allrightsreserved.
ThisdocumentationcontainsproprietaryinformationofStratasysLtd.Thisinformationis
suppliedsolelytoassistauthorizedusersofthisStratasys3Dprintingsystem.Nopartof
thisdocumentmaybeusedforotherpurposes,anditmaynotbedisclosedtootherparties.
Thespecificationsonwhichthisdocumentisbasedaresubjecttochangewithoutnotice.
Nopartofthisbookmaybereproducedinanyformorbyanymeans,norstoredinadatabase
orretrievalsystem,withoutpriorpermissioninwritingfromStratasysLtd.
IfthisdocumentisdistributedasaPDFfile,youmayprintitforinternaluse.
April2018
DOC-06500Rev.J
Trademarks
ThefollowingareregisteredtrademarksofStratasysLtd.:Stratasys
®
,Objet
®
,FullCure
®
.
Allnamesofproductsandservicescitedinthisbookaretrademarksorregistered
trademarksoftheirrespectivecompanies.
Feedback
Ifyouhaveanyquestionsorcommentsaboutthewayinformationispresentedinthis
document,orifyouhaveanysuggestionsforfutureeditions,pleasesendamessageto
c-support@stratasys.com.
DOC-06500 Rev.J