11 STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY11 STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY
MRW- Flushing Cycle
Economy
Duration: 25 min
Action
The pump purges the model material from the print block,
then flushes the system with the new material.
When to use:
When replacing a light-colored model material with a darker
material (such as VeroBlack), or if the exact color of the
printed models is unimportant. Models will have the mechanical properties of the new
material.
High Performance
Duration: 60 min
Action
Cleans the feed tubes and print block more thoroughly by
flushing the system with more material
When to use:
This cycle ensures that models will have the color (and the
mechanical properties) of the new material, when replacing a dark colored
material (such as VeroBlack) with a lighter-colored material.
To Next Page
Loading...
