12 STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY
What: the wiper removes excess material from the print heads and keeps them clean. The wiper cleaning includes
the cleaning of the waste trap.
Why: cleaning the wiper increases the performance of the print head nozzles and prevents resin build up on the print
heads.
When:
• Clean once a week.
• Replace if worn out.
• How:
1. Run the wiper cleaning wizard (Options wizards wiper cleaning).
2. Use a soaked cloth with isopropanol or ethanol to clean it.
Wiper Cleaning
Visually inspect the wiper and if necessary replace it.
To Next Page
Loading...
