CAD (Computer-Aided Design)
A file format used for producing
models on Objet printers.
SW for preparing the
tray for print.
Sends the print job to the
printer & manages the queue.
STL (Standard Triangulation
Language)
and assemblies
SW used by engineers and
Architects for designing models
Objet Studio/ GrabCAD
Job Manager
Deliver the material to the print block.
Pumps
Keeps the material from leaking out of the head block.
Vacuum
2 model and 2 support cartridges
Material Cartridges
Contains the prints head and printing material.
Moves in X and Y direction (2-D)
Print Block
1 model & 1 support jet liquid material through
nozzles onto the tray .
Print Heads
Flattens and smoothens the layer
Cures the jetted material
UV Lamp
Moves down on the z-axis
Build Tray (z-axis)
wipes the print heads during purge sequence
Wiper
Excess material is transferred to the waste container
the roller bath and wiper bath.
Waste Container
Roller
Printed model
Cleans the printed model by
removing support materials
using water pressure or
circulation
Remove model from the printer
with spatula
Support Removal System
Printing Workflow
To Next Page
Loading...
