31 STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY
How:
1. Monitor the weight of the waste container in the Maintenance screen of the Printer SW Control application.
2. Assemble the cardboard box with a waste bag.
3. Unscrew the cap securing the waste tube drain and remove the waste container from the printer.
4. Close the full container with a sealing cap.
5. Place a new waste container in the cartridge drawer and connect the drain tube.
Make sure that the plastic bag inside is not twisted.
Replace the Waste Container
Dispose of the full waste container in accordance with the
environmental and safety regulations.
To Next Page
Loading...
