43 STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY
What: the wizards drain out the materials from the printer and replaces then with cleaning fluids (supplied in the start-
up kit).
When: if you will not use the printer for up to one week.
How:
• start the wizard (Options Wizards Material Flush/Fill).
• Choose the option to flush system with cleaning fluid.
• Remove printing cartridges and place cleaning fluids.
• After the printer computer shuts down, turn off the main power switch at the back of the printer.
System Shutdown – more than 7 days of idle
To Next Page
Loading...
