21 STRATASYS / MATERIALS OVERVIEW
Medical | Med610, Biocompatible
Ideal for:
• Medical and dental applications
• 3D printing of dental and orthopedic surgical guides
• Checking the customized fit of surgical guides and delivery trays in the mouth
• Monitoring oral soft tissue during surgical guide procedures
Properties:
• Suitable for applications requiring skin contact of over 30 days and short term
mucosal-membrane contact of up to 24 hours.
• The material has five medical approvals according to the harmonized
standard ISO 10993-1
Color: Translucent
* SUP707 has not been approved
When utilizing MED610, it is the responsibility of the customer, its respective customers and end-users to determine the biocompatibility of
all of the components, printed parts, and all other materials used in the finished product for their respective purposes, including prolonged
skin contact (of more than 30 days) and short-term mucosal-membrane contact (of up to 24 hours). Results may vary if different conditions
apply other than those existing at Stratasys laboratories during testing and those applied for the purposes of biological testing under the
procedures and provisions of EN ISO 10993-1:2009, “Biological Evaluation of Medical Devices - Part 1: Evaluation and Testing within a
Risk Management Process.”
To Next Page
Loading...
