47 STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY47 STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY
Work Flow
Insert Model
Part manipulation
on the tray
Tray Validation
Production Estimates
Build
Inserting one or more objects on the build tray
Automatically or manually position objects on the build tray to
minimize printing time.
Before sending a job to the printer, check that the tray is “valid”
and can be printed.
Calculate the time and material needed for producing the tray
before sending it to the printer.
Send the tray to the Job Manager for printing
1
2
4
5
6
Select model material
and finish
Assign model material to the object and select surface finish- matte
or glossy
3
To Next Page
Loading...
