54 STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY54 STRATASYS / THE 3D PRINTING SOLUTIONS COMPANY
Choosing printing mode
• Prints models in 16‐micron layers, suitable for producing fine details and
delicate items.
• Requires much more time to print most trays, compared to HS mode.
HQ
High Quality
HS
High Speed
• Prints models in 28‐micron layers, suitable for producing most models.
• Requires much less time to print most trays, compared to HQ mode.
Draft
• Prints models in 36‐micron layers, suitable for producing large models and initial
designs.
• Fastest printing mode.
• Most economical printing mode.
To Next Page
Loading...
