Transportation and
installation
V 152 10 11 Rev.: END
4-4
4.4.2
Electrical connection
Danger!
Danger of death from electric shock!
Before performing any repair, set-up or maintenance work, isolate
the gantry press from the power supply via the main switch!
Unplug the gantry press mains plug.
Secure the gantry press to prevent any unintentional reactivation!
Affix warning information sign!
The connection may only be performed by skilled and authorised personnel in
accordance with the well-established VDE (Association of German Electrical
Engineers) regulations.
The gantry press is fitted with a plug for a CEE- 400 V/16 A or 32 A socket.
Check whether the electrical fuse protection matches the press rating (see chapter
entitled Technical Data).
Route the connecting cable in such a way that it does not present a tripping hazard.
To Next Page
Loading...
