Servicing
V 152 10 11 Rev.: END
6-2
6.1
Care
Care of the gantry press is limited mainly to the regular removal of dust and other
deposits from all surfaces. Cleaning should be performed by wiping, blowing or
sweeping only. On sensitive surfaces (such as piston rods) do not clean by blowing or
sweeping but use instead the following means only.
Caution!
Improper cleaning of the gantry press may result in malfunctions and
damage!
Do not select an aggressive cleaning agent which attacks the metal and
plastic surfaces as well as hose connections.
Never clean the sensitive components with coarse brushes and heavy
mechanical pressure. Do not use linting cleaning cloths.
Never clean the gantry press with a water jet or high-pressure cleaner.
All aqueous industrial cleaners can be used without restriction.
Appropriate care helps keep the gantry press in a permanently functional state.
● Thoroughly clean the gantry press at least once a week.
● Do not use metallic objects such as scrapers, screwdrivers, etc. to clean uncoated
machine parts, such as piston rods, guides, etc.
● Do not use aggressive cleaning agents or solvents (damaged seals) or even
emery paper for cleaning.
● Use only non-linting cloths for cleaning work.
To Next Page
Loading...
