Servicing
V 152 10 11 Rev.: END
6-7
Before repair and maintenance work
● Depressurise hydraulic system. Using a pressure gauge, check whether the
hydraulic system is depressurised.
● When working, use only proper tools and replace worn parts, bolts, nuts, etc. with
original spare parts only.
● Carefully identify components and pipelines before removing them.
6.3.2
Safe maintenance of electrical equipment
Work on the power supply may be performed by electricians only.
Danger!
Danger of death from electric shock!
● Before performing any repair, set-up or maintenance work, isolate
the gantry press from the power supply via the main switch!
● Secure the gantry press to prevent any unintentional reactivation!
● Check that the machine is de-energised!
● Lock main switch and affix warning information signs!
● Also actuate EMERGENCY STOP pushbutton.
● Regularly check the electrical equipment of the gantry press.
● Immediately rectify loose connections and damaged cables.
Information!
When working on live parts, it is essential to request the assistance of a
second person, as follows:
The 1st person works and
the 2nd person stands continuously by one of the Emergency
Stop pushbuttons to actuate it in an emergency.
6.3.3
Safe maintenance of hydraulic equipment
Only persons with specific knowledge and experience in hydraulic systems may work
on hydraulic equipment.
To Next Page
Loading...
