EC Declaration of Conformity
Design:
Gantry press
Model:
PP 1207Plus, PP 1208Plus, PP1208L and Plus 70
Machine no.:
_____________________
has been developed, designed and manufactured in
compliance with the EC Directives
2006/42/EC Machines
2004/108/EC Electromagnet. Compatibility
97/23/EC Pressure equipment
- the protection goals of the 2006/95/EC Low-Voltage
Directive
have been observed in accordance with Appendix I,
No. 1.5.1 of the Machinery Directive -
under the sole responsibility of
Company:
Strautmann Umwelttechnik GmbH
Auf dem Haarkamp 22
49219 Glandorf, Germany
The following harmonised
standards are applied:
EN ISO 12100 Safety of Machines, Equipment and
Plant
EN ISO 13857 Safety of Machines; Safety
Distances - Upper and Lower Limbs
EN 693 Hydraulic Presses; Safety
EN 982 Safety of Hydraulics
EN 61000-6-4 EMC Emitted Interference
EN 61000-6-2 EMC Interference Immunity
EN 60204-1 Safety of Electrical Engineering
A complete list of the applied standards, directives and
specifications is available from the manufacturer. Technical
documentation is available in full.
The operating instructions which belong to the single
chamber baling press/multi-chamber baling press are
available.
documentation:
Mr Martin Meyer
X
Glandorf, 22.03.2010
To Previous Page
Loading...
