Strider MX 4 - Adjusting the backrest inclination; Adjusting the headrest hight

27
Issued: 24.02.2005
STRIDER MX Adjusting the seat position
6.2.4 Adjusting the backrest inclination
The backrest inclination can be adjusted in
three locking stages.
1st stage = drive setting
2nd stage = drive setting
3rd stage = not for driving!
Adjusting the
backrest
Tipping hazard!
• Only adjust the seat adjustment to
the third position when the vehicle
is not travelling!
Pull the locking lever (6) and move the
backrest forwards or backwards to the
required position (7).
Let go of the locking lever and engage
the locking mechanism by pushing the
backrest slightly forwards and
backwards.
➨
➨
Accident hazard if backrest
is not properly engaged!
• Ensure that the backrest is
properly engaged after adjustment
by pushing it slightly forwards and
then backwards.
Adjusting the
headrest
6.3 Adjusting the headrest hight
Press the locking lever (2) in and push
the headrest down to the required
position (3).
➨
Raising the headrest:
Pull the headrest upwards into the
required position (1) until the lowering
protection engages audibly.
➨
Lowering the headrest:
Release the locking lever, and engage
the lowering protection by moving the
headrest slightly.
➨