94
Issued: 24.02.2005
STRIDER MX
The nameplate is located on the metal sheet
between the batteries and contains the
following information:
• Model number
• date manufacture (month/year)
• Manufacturer
• Serial number
• maximum speed
• User weight
If you are not intending to use your Strider
for longer periods (e.g. over the winter, you
should prepare it as follows:
Remove soiling and dust.
Charge the batteries completely.
Check the tyre pressure and adjust if
necessary.
Place the Strider on supports. Lift the
Strider high enough so that the tyres are
no longer touching the floor.
➨
➨
➨
➨
Care during storage:
Recharge the batteries once a month
(see chapter 12.0).
➨
Front support, 3 wheel
version
Rear support
Temporary storage
Front support, 4 wheel
version
Nameplate
19.0Temporary storage
20.0Appendix
20.1 Nameplate
To Next Page
Loading...
