38
Issued: 24.02.2005
STRIDER MX
Driving the Strider
8.2 Seat belt -
adjusting for length and putting on
Turn the seatbelt closer (1) at right
angles to the seat belt.
Adjust the length by pulling the
appropriate belt side.
(a) = shortening the belt length
(b) = lengthening the belt length
Tension the loose seatbelt end by pulling
the belt holder (2).
➨
Press the closer (1) into the lock until it
audibly engages.
➨
Adjusting for length:
Adjusting for length
Closing the seatbelt: Closing the seatbelt
NOTE!
If you feel you are safe enough, you
can of course get onto the Strider
without turning the seat round.
• You can lift up the armrest on the
side where you are standing and
then get on.
To Next Page
Loading...
