EasyManua.ls Logo

Strider MX 4 - The auto switch-off; The drive unit; The drive; The control unit

Default Icon
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50
Issued: 24.02.2005
STRIDER MX
The auto switch-off automatically switches the Strider off after
20 minutes at a standstill.
This protects the batteries from being discharged if the Strider
was inadvertently not switched off.
Things to know
The drive consists of the drive motor (a),
the gearbox (b) and the rear axle (c).
Drive takes place from the drive motor via
the gearbox and rear axle to the rear
wheels.
The complete drive unit is located in the
rear of the Strider and consists of the
following main components:
• the drive (1)
• the control unit (2) and
• the batteries (3)
Drive unit
the drive
NOTE
The control unit and its cabling is
protected by a shroud (2). The photos
show the unit without the shroud for
clarity.
The control unit is a programmable
electronic regulating unit. It regulates drive
characteristics such as acceleration,
maximum speed and braking behaviour.
The drive characteristics can be set to
match the user’s requirements by altering
the programming.
Reprogramming may only be carried out by
specialist dealers.
13.3 The auto switch-off
13.4 The drive unit
13.5 The drive
13.6 The control unit

Table of Contents

Related product manuals