Safety Regulations
2 — 5
03_0124_0702GB
Use of the machine other than described in the section ”Designated
use”, or which goes beyond such use, is considered contrary to the
designated use. Maschinenbau Rudolf GmbH accepts no liability for
damage resulting from such use. The risk of such misuse lies
entirely with the machine operator.
Never make any modifications, additions or conversions to the ma-
chine which might affect safety without first obtaining the manufactu-
rer’s approval. This also applies to the installation and adjustment of
safety devices and valves as well as to welding work on load-bea-
ring elements.
The values quoted on the rating plate, in the Technical Data and on
the machine card are the maximum permissible values.
The control and safety settings made at Maschinenbau Rudolf
GmbH must not be changed.
The machine must not be operated with deactivated, modified or de-
fective safety devices.
Safety devices must only be repaired, adjusted or replaced by tech-
nically qualified experts.
All devices of relevance for safety must be in place and fully functio-
nal.
2.3 Use contrary to the
designated use
Modifications
To Next Page
Loading...