Transport, Set-up and Connection
4 — 5
04_0110_0703GB
The machine must be set up so that it is absolutely stable and
se
cured against rolling.
" Align the machine horizontally. Observe the permitted
inclination angles.
Observe the maximum inclination angles during machine set-up and
operation.
Refer also to chapter: ”General Technical Description” -- section
”Technical data” for the maximum permitted inclination angles.
Danger
Lubrication is no longer guaranteed at excessive inclination angles.
These conditions will lead to increased wear or machine damage.
Do not operate the machine at inclination angles greater than those
specified!
4.6 Setting up
Inclination angles
To Next Page
Loading...