Strobl Strocomp 433 - With Rotary Switch

Starting up
5 — 6 09_0150_0802GB
" Switch on the ”Machine ON” main switch (1).
⇒ The power supply in the control cabinet switches on.
⇒ The engine starts.
⇒ The compressor operates in automatic mode.
The machine is switched on at the rotary switch.
OFF
AUTO
1 2
3
Item Designation
1 ”Machine ON -- OFF” rotary switch
2 Position for switching off machine is ”OFF”
3 Position for automatic mode is ”AUTO”
" Switch the rotary switch (1) to position ”AUTO” (3).
⇒ The power supply switches on in the control cabinet.
⇒ The engine starts.
⇒ The compressor operates in automatic mode.
You may have to connect the machine to the second control cabinet,
depending on whether you wish to use one or two compressors.
" Switch the rotary switch (1) to position ”AUTO” (3).
⇒ The power supply switches on in the control cabinet.
⇒ The engine starts.
⇒ The second compressor operates in automatic mode.
with rotary switch