Transport, Set-up and Connection
4 — 3
04_0132_0802GB
Transport the machine by hand as follows:
" S
hut the machine down. Refer also to chapter:
”Decommissioning”.
" Unfold the transport bracket.
" Lift the machine slightly by the transport bracket and move to
the intended set-up site.
" Set down the machine again.
" Fold up the transport bracket again.
" Position the machine correctly. Refer also to section: ”Set-up”.
The machine may have several transport brackets depending on the
model, in which case all available transport brackets must be folded
up and down accordingly.
4.3 Transport by hand
To Next Page
Loading...