EasyManua.ls Logo

Strobl Strocomp 433 - Page 80

Strobl Strocomp 433
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Faults, Cause and Remedy
7 5
06_0049_0802GB
The motor protection switch has triggered.
Cause Remedy
The compressor oil level is too
low.
Check the compressor oil level and top up if necessary.
The air filter is dirty or clogged. Clean the air filter.
The air intake area on the com-
pressor is obstructed.
Remove all objects and obstacles from around the air intake area.

Table of Contents