Strong SRT 3030 - Power on Control; Usb; PVR Management

7.6.2 Power On Control
Select how the unit should react after inserting the main power.
Power On will let the unit come up in Running mode.
Standby will let the unit come up in Standby mode.
Last state will let the unit come up in the mode in which power was removed, either Running mode or Standby mode.
7.7 USB
The USB menu contains the Media Centre, simple media player feature and the recorded programs in PVR Media. Also
some settings for recording and timeshift can be changed here. The USB menu can be reached from viewing mode
with the GREEN Media} button on the RCU as shortcut.
Media Centre This is a simple media player feature, which can show or play a Video, Music or Picture le. Only
supported le types can be played. Select the partition on your USB device where the le is
and select a le to be played. During play, you can press [OK] and bring up a progress banner,
and then use the pqtu buttons to select special functions in the screen. Also, the buttons
on the RCU perform functions such as pause and play u2, 3, previous le 5 and 6 le. For
video les extra options come available: fast reverse 8 and fast forward 8. With the 7 and
8 buttons you can rewind or forward playback in x2, x4, x8, x16 and x32 speed when pressed
repeatedly. While playing a video le, use OK, then tu (short or long press) to jump quickly
through the video le. Press OK to continue watching on the new point in the video.
File All supported le types can be played from here, whether they are Video, Music or{Picture.
Select File and press OK.
Video Select Video if you are specically looking for video les stored on the USB device.
Press SUBTITLE during video play mode to see options about subtitles, if available. These can
either be Inside which are embedded in the video or Outside with accompanied subtitles les in
the .srt format. These must have exactly the same name as the video le and be located in the
same folder as the video le.
Music Select Music if you are specically looking for audio les stored on the USB device.
Picture Select Picture if you are specically looking for picture les stored on the USB device.
PVR Media This item contains a list the recorded programs, with the last recording at the top o the list.
Use OK to play a selected le, RED to delete a recording and BLUE to delete all in the list.
7.7.1 PVR Management
Timeshift To use Timeshift, set to On. Space on your USB device will reserved for the Timeshift function.
Record Duration Set the maximum time that a Timeshift should run for. Default is 2 hours 00 minutes. The longer
the Timeshift duration is, the more space on your USB device is reserved.
Section Record It is later possible to change Timeshift into a Recording to be saved when 4 is pressed. Set to On
if you want the section from the moment you had started Timeshift included in the recording.
If set to O, the recording will only have the part from when Recording was pressed.
Disk Information Select this option to view technical information about your connected USB device, like Used
space, Free space and Total space and formatted le System.
Format
WARNING The Format function will delete all data and information stored on your USB device or
selected partition. STRONG will not take any responsibility for damaged or lost data on the
USB device. Conrm the format action in the popup screen or EXIT to deny.
If you have multiple partitions on your storage device, select the partition you would like to format. Press OK to start
formatting (or EXIT to cancel it). The format procedure will take some time, depending on the size of the used storage
device. At the end of the process, a “completed formatting” message will appear. Press EXIT to exit the menu.
21
English