Strong SRT 7815 - Table of Contents

2
TABLE OF CONTENTS
1. INTRODUCTION 4
1.1 Safety Instructions 4
1.2 Storage 5
1.3 Equipment Set-up 5
1.4 Accessories 5
1.5 Usage of external USB devices 5
2. YOUR RECEIVER 6
2.1 DEFAULT PIN-CODE: 0000 6
2.2 Front Panel 6
2.3 Side Panel 6
2.4 Rear Panel 6
2.5. Remote Control 7
2.5 Installing the batteries 8
2.6 Using the remote control 9
3. CONNECTIONS 10
3.1 Connecting the Antenna and LNB (Low Noise Block) to the receiver 10
3.1.1 Connection of multiple xed antennas via DiSEqC 1.0 10
3.2 Connecting to digital audio amplier 11
3.3 Basic connection using an HDMI cable 11
3.4 Basic connection using a SCART cable 12
3.5 Connection to main power supply 12
4 STARTING UP FOR THE FIRST TIME 13
4.1 Language setting 13
4.2 Output settings 13
4.2.1 Satellite selection 13
4.3 Channel search 14
5. QUICK GUIDE FOR USING YOUR RECEIVER 14
6. OPERATION 14
6.1 Selecting channels 14
6.1.1 Direct access 15
6.1.2 Channel list 15
6.1.3 Using the CH+/- or
p q buttons 15
6.1.4 Using the
button 15
6.2 Volume Control 15
6.3 Programme Information (Info banner) 15
6.4 Selecting audio language 15
6.5 Selecting subtitle language 16
6.6 Viewing the teletext 16