8
Press in viewing mode to display the Channel List. Use p q in the Channel List to highlight your channel
of choice and press once to select the highlighted channel. Press again to leave the Channel List.
Use t u to toggle between the All Channel list, Channel List and favourite
lists or press for a list of available favourite lists.
p q
p switches to the next channel.
q switches to the previous channel.
switches to the next 10 channels.
switches to the previous 10 channels.
While watching TV you can press the button any time to get information about the current
channel and event*. Press twice for technical details about the current channel. If you have
connected an USB device then it will also call the Record list or Timeshift banner when you press the
button once more.*Event information is displayed when available. Availability depends on
broadcast.
Some channels support a choice of audio formats and/or languages. To select another audio stream,
press in viewing mode. A list with available audio streams will now be displayed. Use p q to
select the desired stream and confirm with . The audio channel as stereo, mono, left and right can
be selected with the t u buttons.
Your receiver includes a fully featured Teletext. To access Teletext, press the button in viewing
mode and use the buttons to input the number of the page you wish to see. The coloured
buttons of the remote control allow you to jump to selected pages directly, as indicated on the
bottom of the teletext screen. Use the p q buttons to select one page up or down, use t u buttons
to select subpages. Press or to get back to viewing mode.
If characters are not displayed correctly then check if your Teletext language
is set to the correct language. See chapter .
Some channels support a choice of subtitle languages. Press in viewing mode to display a list of
available subtitle languages. Select your subtitle of choice with p q and press to confirm. Press
to leave without making changes.
Timeshift allows you to pause live broadcasts and resume playback later. Connect your USB storage
device and make sure that Timeshift is set to ON in the menu DVR Settings. Press /2 in
To Next Page
Loading...
