Digital Audio Output: Toggles between PCM and Bitstream output. When PCM is selected, all digital
audio will be converted to stereo audio. Bitstream enables multi-channel
audio on HDMI for use with a Home Cinema Set.
Here you can setup and adjust your video output if you do not like the colours in the playback of
some media files or you want to change the colours for the TV screen.
Here you can set up your region and time zone.
Region: Use t u to select the region you live in.
GMT Usage: Set to On for broadcaster defined time or to Off to input time and date manually.
GMT Offset: Allows you to adjust the time zone you live in. This option is only available
when GMT Usage is set to On. The GMT Offset range is “-11:30 ~ +12:00”,
increasing by half hours progressively. The cities matching the set GMT Offset
are displayed at the bottom of the screen.
Summer Time: Select Off or On to add one hour extra for summer time during the summer.
Date: Date and Time settings are available only when GMT Usage is set to Off. Use
the buttons to enter the date. Press to proceed.
Time: Date and Time settings are available only when GMT Usage is set to Off. Use
the buttons to enter the time. Press to proceed.
Time Display Select On to display time on screen, Off to remove.
This menu allows you to set up to 8 timed events for recording or waking up the receiver.
Use p q to select Timer Setting from the System Setup menu and press to enter.
The receiver will display a list with 8 timers, followed by their respective status. Select the timer you
wish to set or change with p q and press to proceed.
The timer setup menu will now be displayed.
The following settings are available:
Timer Mode: Choose between Off (Timer inactive), Once or Daily (Timer will be executed
every day, same time).
Timer Service: Choose between Channel (Timer will wake up the receiver) or Record (Timer
will start to record the scheduled event).
Wakeup Channel: Use t u to select the channel the timer will wake up with.
Wakeup Date: Use the buttons to input the date for the timed event.
On Time: Use the buttons to input the start time.
Duration: Use the buttons to input the timer duration.
When all settings are according to your wishes, use p q to move the highlight to Save and press
to confirm. To quit the timer without saving your settings, move the highlight to Cancel.
This menu allows you to protect the installation menu and/or channels with a password. You can also
enter a new password in the Parental Lock menu.
To Next Page
Loading...
