23. Shows the EPG (Electronic Programme Guide) in TV mode
Menu On: Activates the highlighted menu item.
24. 1 Start playback from selected file or resume Timeshift
25. 2 Start Timeshift mode or pause
26. 3 Stop of playback
27. 4 Start Records the TV programme to the connected storage device
28. To zoom in to the video on screen
29. Change aspect modes: 4:3 LB, 4:3PS, 16:9 and to Auto.
30. Change video resolution modes: 480i up to 1080p
31. Call directly Timer menu to view or set timers
32. Multimedia and Teletext functions
Fig. 4
To receive broadcast signal, your terrestrial indoor antenna must be connected to the ANT IN
connector on the back of the receiver.
The ANT OUT connector allows you to loop the antenna signal to a second receiver or TV set.
If the signals at your location are too weak to receive proper signals with the
included indoor antenna, we recommend using an outdoor antenna which
can be pointed to transmission tower. Ask your local dealer for more advice.
Fig. 4
The TV set shall be connected with the receiver using a good quality HDMI cable. This connection
gives the highest possible quality.
Fig. 4
SRT 8113 is also equipped with a SCART connector; alternatively, the TV set can be connected to the
receiver using a good quality SCART cable.
Fig. 5
By connecting your receiver to a digital amplifier or home theatre system, you can enjoy the best
possible sound quality and multi-channel audio (depending on broadcast). Connect your Digital
Audio Amplifier or home theatre system with a suitable cinch cable to the S/PDIF connector on the
back of the receiver.
To Next Page
Loading...
