NOTE: If the signals at your location are too weak to receive proper signals with
an indoor antenna, we recommend using an outdoor antenna which can
be pointed towards the transmission tower. Ask your local dealer for more
information.
3.2 Connecting to TV with HDMI cable
Fig. 6
The TV set shall be connected with the receiver using a good quality HDMI cable. This connection
gives the highest possible quality.
3.3 Conne cting to TV with 3 RCA-3 RCA cable
Fig. 6
Use a 3 R CA-3 RCA cable for connecting this receiver to older TVs that are not equipped with an HDMI
connector.
3.4 Connecting to a Digital Audio Ampli er and TV using
HDMI
Fig. 7
By connecting your receiver to the latest digital ampli ers or Home Cinema systems, preferable
with HDMI connections, you will enjoy the best possible sound quality and multi-channel audio
(depending on broadcast). Connect the HDMI output of the receiver to an input of your ampli er,
and then connect the HDMI output of the ampli er to your TV set. Select the correct input on your
ampli er to watch and listen to programmes.
3.5 Connecting a USB storage device
Fig. 8
Connecting a USB device to the unit allows you to playback multimedia les. See chapter 7.5. Media
Player.
NOTE: It is recommended to use USB 2.0 storage devices or higher for recording
and play back of TV programmes or HD movies.
NOTE: Timeshift/recording and playback only works properly when a fast
USB storage device such as a USB2.0 HDD is connected to the receiver.
Timeshift/recording and playback of HD content requires a su cient read/
write speed of the used USB storage device.
4.0 STARTING UP FOR THE FIRST TIME
When you use your receiver for the rst time, please select your menu language using and press
OK to con rm selection. You will follow to the Welcome “Easy install” menu.
8
To Next Page
Loading...
