Strong SRT 8205 - 6.5 Subtitles; 6.6 Timeshift; 6.7 EPG (Electronic Programme Guide)

To access Teletext, press the TTX button in viewing mode and use the 0~9 buttons to inp ut the
number of the page you wish to see.
The coloured buttons of the remote control allow you to jump to selected pages directly, as indicated
on the bottom of the Teletext screen.
Use the  buttons to select one page up or down, use the  buttons to select subpages.
Press EXIT or TTX to get back to viewing mode.
6.5 Subtitles
Some channels support a choice of subtitle languages.
Press SUBTITLE in viewing mode to display a list of available subtitle languages.
Select your subtitle of choice with  and press OK to con rm.
Press EXIT to leave without making changes.*
*Availability of DVB/HoH subtitles depends on the broadcast. If subtitles are not supported, they can be activated via Teletext if available.
6.6 Timeshift
Timeshift allows you to pause live broadcasts and resume playback later.
To activate this function, set the Timeshift mode in the DVR Setting menu to on by selecting Pause. For
details, see 7.5.6.
Press 2 in viewing mode to activate Timeshift.
The progress information banner appears on screen. Live TV keeps playing for moment and will then
pause.
Press  to resume Timeshifted playback.
Press 3 to return to live TV.
NOTE: Timeshift and its playback only work properly when a fast USB storage
device such as a USB2.0 HDD is connected to the receiver. Timeshift and
playback of HD content requires su cient read/write speed of the used
USB storage device.
6.7 EPG (Electronic Programme Guide)
The Electronic Programme Guide is a very useful function that allows you to view event schedules
and programme information and to mark events/movies for recording.
To access the EPG, press the EPG button in viewing mode.
Use  to select a channel and  to select an event.
Press OK or INFO to display detailed information of the selected event.
Use EXIT to quit the detailed information screen.
Press RED to access further step functions. Use  to select the desired step and OK to execute it.
Press EXIT to quit the step function.
Press GREEN to set a timer for a selected event.
Refer to section 7.3.4 for details of the timer function.
11