Strong SRT 8205 - 7.4.3 S;W Upgrade by OTA; 7.4.4 Upgrade by USB; 7.4.5 Auto-update OTA; 7.5 Media Player

Input the correct PIN code using the 0~9 (DEFAULT PIN: 1234). A con rmation window is displayed.
Select Yes to return to factory settings. Select No to cancel.
Press EXIT to leave.
7.4.3 S/W Upgrade by OTA
This receiver is equipped with an Over The Air software upgrade function. An Over The Air update
might not be available in your region.
Please visit our website www.strong.tv or contact your local service hotline for more information
about this option.
7.4.4 Upgrade by USB
This feature allows you to upgrade receiver software via the USB port. When new software is available
for your receiver, it can be downloaded from our website www.strong.tv.
For USB upgrading procedure please follow provided on web-site instruction
WARNING: During the upgrade process NEVER disconnect the receiver from the mains
or switch o the power! Doing so might damage your receiver and will
void warranty!
After an update the receiver restarts automatically.
7.4.5 Auto-update OTA
If set to On the unit will check automatically at the moment of going to stand-by for an Over The
Air software upgrade. An Over The Air update might not be available in your region. Please visit our
website www.strong.tv or contact your local service hotline for more information about this option.
7.5 Media Player
The Media Player menu consists of the following submenus: Records, Video, Music, Image, HDD
Information, DVR Setting and Remove USB device safely.
These functions allow playback of di erent kind of  les from the connected USB storage device. In
the Media Player menu select required option and press OK to enter a submenu.
When entering a submenu, the highlight is on the USB storage device.
Press  and then OK to open the directory respectively its folders/subfolders.
Use  to select a  le or folder and then press OK to open the folder/subfolder (if applicable) or
start playback of the  le.
Press the EXIT button to exit.
Use the buttons like described below in order to choose functions during the di erent playback
modes.
7.5.1 Records
Switch Press 1 to switch between Records/Music/Image or Video playback mode.
Rename Press RED to enter a new name for the selected recording.
Lock Highlight the recording that you want to lock. After pressing GREEN you will
be asked to input your PIN code. DEFAULT PIN: “1234”. After entering your
19