Struers LectroPol-5 - Working with Electrolytes

WARNING
Safety critical components must be replaced after a maximum lifetime of 20 years.
Contact Struers Service.
CRUSHING HAZARD
Take care of your fingers when handling the machine.
Wear safety shoes when handling heavy machinery.
2.5 Working with electrolytes
WARNING
Danger of chemical burns.
Follow all safety requirements for handling, mixing, emptying and disposing of
electrolytes.
CAUTION
Always request and read the Safety Data Sheet for each electrolyte before you
start working with it.
CAUTION
Many electrolytes contain alcohol or other flammable solvents. Always follow all
safety precautions when working with these types of electrolyte.
CAUTION
The operator must be fully instructed in how to handle and use electrolytes with
this machine.
CAUTION
The machine is designed to be used with electrolytes recommended by Struers.
Electrolytes that are not recommended by Struers can be dangerous to the
operator or harm the machine.
Working with perchloric acid
See Perchloric acid ►12.
Availability
Struers electrolytes are not marketed in the USA. If needed, the chemical compounds for the
electrolyte must be purchased independently.
Contact your Struers representative for further information.
After use
Do not let the electrolyte dry or crystallize inside the machine or on the polished material.
Disposal
SeeDisposal ►29.
2 Safety
LectroPol-5 11