1 About this manual
CAUTION
Struers equipment must only be used in connection with and as described in the
Instruction Manual supplied with the equipment.
Note
Read the Instruction Manual carefully before use.
Note
If you wish to view specific information in detail, see the online version of this
manual.
1.1 Accessories and consumables
Accessories
For information about the available range, see the LectroPol-5 brochure:
• The Struers Website (http://www.struers.com)
Consumables
The equipment is designed to be used only with Struers consumables specifically designed for
this purpose and this type of machine.
Other products may contain aggressive solvents, which dissolve e.g. rubber seals. The warranty
may not cover damaged machine parts (e.g. seals and tubes), where the damage can be directly
related to the use of consumables not supplied by Struers.
For information about the available range, see:
• The Struers Consumables Catalogue (via https://www.struers.com)
2 Safety
2.1 Intended use
The unit is intended to be used in combination with:
• LectroPol-5 Control unit
The machine is for use in a professional working environment (e.g. a materialographic
laboratory).
LectroPol-5 is designed to perform automatic electrolytic sample preparation and etching of
metallographic specimens.
1 About this manual
LectroPol-5 5
To Next Page
Loading...
