4 Transport and storage
If, at any time after the installation, you have to move the unit or place it in storage, there is a number
of guidelines we recommend that you follow.
• Package the unit securely before transportation. Insufficient packaging could cause damage to
the unit and will void the warranty. Contact Struers Service.
• We recommend that you use the original packaging and fittings.
4.1 Transport
1. Clean the polishing unit thoroughly. See Cleaning ►24.
2. Disconnect the electrical power supply.
3. Disconnect the polishing unit from the water supply or the cooling unit (option).
4. Move the unit to its new position.
4.2 Storage
Note
We recommend that you keep all original packaging and fittings for future use.
• Disconnect the unit from the electrical power supply.
• Disconnect the unit from the water supply.
• Remove any accessories.
• Clean and dry the unit before storage. See Daily ►24.
• Place the machine and accessories in their original packaging.
• Place a bag of desiccant (silica gel) in the box.
• For details on storage temperature and humidity, see Technical data - LectroPol-5 ►30.
Control unit
See the Instruction Manual for this unit.
5 Installation
5.1 Unpack the machine
Note
We recommend that you keep all original packaging and fittings for future use.
18 LectroPol-5
4 Transport and storage
To Next Page
Loading...
