Struers LectroPol-5 - Daily Maintenance; Daily Cleaning Procedure

7.2 Daily
• Clean the unit at the end of each working day.
Note
Avoid spilling electrolyte on the control unit.
WARNING
Dried electrolyte can be hazardous.
WARNING
It is important that no electrolyte is allowed to dry and/or crystallize inside the
machine or on the polished material.
Note
Do not use acetone, benzol or similar solvents.
1. Use the cleaning function. See LectroPol-5 Control unit Instruction Manual.
2. When the cleaning program has finished, use a damp cloth to wipe all surfaces of the polishing
unit.
3. Wipe the inside of the polishing unit where the electrolyte container is stored.
4. Thoroughly clean all masks that have been used.
7.2.1 Cleaning
When you have finished using the machine, you must clean the system.
CAUTION
Always use goggles or a protective shield, and chemical-resistant gloves.
WARNING
Do not touch, move or tamper with the unit during use.
Carry out the cleaning procedure from the LectroPol-5 control unit.
1. From the Main menu screen, select the Manual funct. screen.
2. From the Manual Functions screen, select the Cleaning screen.
24 LectroPol-5
7 Maintenance and service