To Next Page
D
David WilsonSep 2, 2025
How to clear RF delivery exceeded continuous limit on Stryker Medical Equipment?
- MMaria JonesSep 2, 2025
If RF delivery has exceeded the continuous limit on your Stryker Medical Equipment, clear the error and continue.
How to clear RF delivery exceeded continuous limit on Stryker Medical Equipment?
If RF delivery has exceeded the continuous limit on your Stryker Medical Equipment, clear the error and continue.
How to stop electrical interference in Stryker Crossfire 2 Medical Equipment?
If you're experiencing sporadic electrical interference with your Stryker Medical Equipment, try the following: * Power down all electrical equipment not in use. * Increase the distance between your unit and other electrical equipment. * Connect the unit and other equipment to different outlets.
What to do if temperature is higher than normal in Stryker Medical Equipment?
If the temperature of your Stryker Medical Equipment is higher than normal, allow the unit to cool before restarting it.
What to do if a hardware fault is detected in Stryker Medical Equipment?
If a hardware fault is detected in your Stryker Medical Equipment, turn the power off and on again. If the problem persists, contact a Stryker representative or return the console for repair.
What to do if a software fault is detected in Stryker Crossfire 2?
If a software fault is detected in your Stryker Medical Equipment, turn the power off and on again. If the problem persists, contact a Stryker representative or return the console for repair.
How to fix a power-on self test error on Stryker Crossfire 2?
If a power-on self test error has occurred with your Stryker Medical Equipment, turn the power off and on again. If the problem persists, contact a Stryker representative or return the console for repair.
What to do if Stryker Crossfire 2 Medical Equipment RF probe communication error?
If there's an RF probe communication error with your Stryker Medical Equipment, check the connection to the console. If necessary, replace the probe.
What to do if Stryker Medical Equipment RF power is too high?
If the RF power is too high on your Stryker Medical Equipment, check the probe for damage. If necessary, replace the probe.
What to do if the AC voltage is incorrect in Stryker Crossfire 2 Medical Equipment?
If the AC voltage is incorrect for your Stryker Medical Equipment, turn the power off and on again. If the problem persists, contact a Stryker representative or return the console for repair.
What to do if Stryker Crossfire 2 exceeded time usage?
If the Stryker Medical Equipment has exceeded its time usage, replace the probe.
General| Brand | Stryker |
|---|---|
| Model | Crossfire 2 |
| Category | Medical Equipment |
| Language | English |
