EN-10
Interface
The Crossre2 interface displays system status, enables you to choose between RF ablation
and shaver modes, and enables you to adjust power and speed settings. Activating the actual
handpieces is performed through controls on the handpiece and on the Crossre Footswitch.
1 2 3 54
1. Menu The Menu button opens a menu for selecting user
and system settings.
2. Error indicator The Error indicator shines red when a system error
occurs.
3. LCD screen The LCD screen displays system status, error codes,
mode of operation, cutting speed, and power levels.
4. Select The Select button toggles between RF and Shaver
controls. The selected device can then be controlled
using the Crossre2 interface.
5. Adjust The Adjust buttons increase/decrease speed and
power settings for the selected device.
To Next Page
Loading...
Need help?
General
