Service Information − Optional Scale System
22
SCALE DISPLAY COVER REPLACEMENT
Required Tools:
Utility Knife Phillips Screwdriver
1. Using a utility knife, pry up a corner of the display label and remove the label from the upper display cover.
2. Using a Phillips screwdriver, remove the four screws holding the upper display cover to the display box
and lift off the cover and lens.
3. Remove the lens from the damaged display cover and install it on the new cover.
4. Using the four Phillips screws, reinstall the new upper display cover with the lens.
5. Clean the surface of the display cover with alcohol and install the new display label.
SCALE DISPLAY LENS REPLACEMENT
Required Tools:
Utility Knife Phillips Screwdriver
1. Using a utility knife, pry up a corner of the display label and remove the label from the upper display cover.
2. Using a Phillips screwdriver, remove the four screws holding the upper display cover to the display box
and lift off the cover and lens.
3. Remove and discard the damaged lens. Install the new lens on the cover.
4. Using the four Phillips screws, reinstall the upper display cover with the new lens.
5. Clean the surface of the display cover with alcohol and install the new display label.
Return to Table of Contents
To Next Page
Loading...
