Preparing for Use 17
3 Preparing for Use
Mounting the SmartPump
WARNING: Ensure the SmartPump is mounted on the roll stand pole
securely. Failure to comply may result in user/patient injury.
1. Assemble roll stand. See instructions for use supplied with roll
stand.
2. Gently lower the SmartPump onto the roll stand pole. Adjust the
height of the SmartPump using the adjustment knob to facilitate
access to the display and controls.
3. Tighten the knob to secure the SmartPump to the roll stand pole.
Roll Stand Pole
Cuff 2
To Next Page
Loading...
