Cleaning and Maintenance 39
5 Cleaning and Maintenance
Cleaning Recommendations
Clean the SmartPump periodically using the following procedure:
CAUTIONS:
• DO NOT sterilize the SmartPump by any means including
EtO, chemical disinfectant, or steam. Failure to comply may
result in product damage.
• DO NOT use chlorine, ammonia, or iodine-based agents.
Failure to comply may result in product damage.
• DO NOT allow water, detergent or any liquid to enter any
button opening or electrical connector. Failure to comply may
result in product damage.
• DO NOT use abrasive materials. Failure to comply may result
in product damage, like scratching the LCD window.
1. Wipe the exterior surfaces with a soft cloth moistened with a
mild detergent to clean the SmartPump.
2. Wipe the external surfaces with a clean cloth moistened with
warm water to rinse the SmartPump.
3. Wipe the external surfaces with a soft cloth to dry the
SmartPump.
To Next Page
Loading...
