Black plate (150,1)
北米Model "A1100BE-A" EDITED: 2010/ 3/ 23
3-28 Instruments and controls
& Driver’s control center differ-
ential auto indicator light
(STI)
This light functions while the ignition
switch is “ON ”. When illuminated, it
indicates that the driver’s control center
differential is set to the auto mode. It turns
off when the driver’s control center differ-
ential is set to the manual mode. For
details, refer to “Driver’s Control Center
Differential (DCCD) (STI)” F7-18.
! Driver’s control center dif-
ferential auto [+] indicator
light
When the AUTO [+] mode is set, the
AUTO [+] indicator light illuminates.
For details, refer to “Dr iv er’sControl
Center Differential (DCCD) (STI)” F7-18.
! Driver’s control center dif-
ferential auto [−] indicator
light
When the AUTO [−] mode is set, the
AUTO [−] indicator light illuminates.
For detai ls, refer to “Driver’sControl
Center Differential (DCCD) (STI)” F7-18.
& Driver’s control center differ-
ential indicator and warning
lights (STI)
! Indicator lights
When the ignition switch is turned to the
“ON” position, all the i ndicator lights
illuminate for 2 seconds, and then turn off.
When you select the manual mode of the
driver ’s control center differential, the
initial limited slip differential (LSD) torque
that is currently selected for the center
differential is indicated by the illumination
of these indicator lights.
! Warning light
All the indicator lights will flash in the event
that the driver ’s control center differential
has a malf unction. Have the vehicle
inspected by your SUBARU dealer. For
details, refer to “Driver’s Control Center
Differential (DCCD) (STI)” F7-18.
To Next Page
Loading...
