Black plate (152,1)
北米Model "A1100BE-A" EDITED: 2010/ 3/ 23
3-30 Instruments and controls
Information display
1) Outside temperature indicator
2) Fuel consumption indicator
With the ignition switch in the “ON”
position, the outside temperature, current
fuel consumption (if equipped) and aver-
age fuel consumption are indicated on the
display.
The fuel consumption display is linked
with the odometer/trip meter display ac-
cording to the following chart.
Odometer/Trip
meter
Fuel consumption indicator
A trip meter Average fuel consumption
corresponding to the A trip
meter
B trip meter Average fuel consumption
corresponding to the B trip
meter
Odometer
U.S-spec. models:
Not indicated
Other models:
Current fuel consumption
& Outside temperature indica-
tor
1) U.S.-spec. models
2) Except U.S.-spec. models
The outside temperature indicator shows
the outside temperature in a range from
−22 to 1228F(−30 to 50 8C).
The indicator can give a false reading
under any of the following conditions:
. When there is too much sun.
. During idli ng; while running at low
speeds in a traffic jam; when the engine
is restarted immediately following a shut-
down.
. When the actual outside temperature
falls outside the specified indicator range.
To Next Page
Loading...
